Home > Quilting > How To Quilt With A Walking Foot

How To Quilt With A Walking Foot

Everyone wants to quilt, and there are endless ways to do it. There are different types of patterns and designs available for quilting that make everything seem like a breeze. You can quilt with your hand or use a sewing machine to do the same. Both have different quilt techniques, and you need to understand each method to get your quilting right. When you quilt with a machine, you need to use the right presser foot that can make the job easier.

A walking foot can help you in the process. If you think you can use a walking foot only in sewing your regular fabric, then you have underestimated this sewing foot. Walking foot will make your sewing a quilt effortless. It is a built-in feed that comes in every sewing machine; you don’t need to buy it. The feed works in unison and helps in gripping the top layer of the fabric. There are different uses of a walking foot, and machine quilting is probably the best use of all.

In this article, you will get to know how you can make your quilting easier with the help of a walking foot. Without further ado, let’s get started.

How To Quilt With A Walking Foot?

Quilting with a walking foot is the easiest method of quilting. First, you need to baste your quilt by making a quilt sandwich. Attach the walking foot onto the machine; the U-shaped foot is a walking foot where the needle pops from the between. Now you need to set up the stitch and choose the running stitch. Make sure to adjust the length and width of the stitch. Choose the right point on the quilt, to begin with. Starting from the center is always a better idea. Begin with stitching the edge of the quilt and sew from one edge to another. You can keep changing the machine’s setting to adjust the length and width to make more patterns and designs.

Step-By-Step Guide To Use Walking Foot For Quilting

Once you have pieced the quilt, stitching is the most strenuous part. Free motion quilting can become a lot more difficult if you do not have the right presser foot. Fortunately, a walking foot is a right fit for your quilting endeavors. If you are into straight line quilting, a walking foot will do wonder in making your quilting successful.

Here’s how you can use a walking foot to make quilting seem like a breeze:

Supplies You Will Need

  • Batting
  • Pieced quilt top
  • Spray baste
  • Rotary cutter
  • Cutting mat
  • Quilting gloves
  • Walking foot
  • Painter’s tape

Step 1: Baste It

It would help if you began with basting your quilt. Make a quilt sandwich on a smooth surface, which is larger in area. You can also tape your quilt from the back to prevent it from shifting. Make sure the fabric is even from all the sides, and there are no puckers in between. When things are smooth, take out your spray baste and start basting from the edges. Start smoothing from the center to outwards. When the spray basting is secure, you can remove the tapes and iron to press the basting.

Step 2: Attach The Foot

Now it’s time to attach the foot onto the machine. It is a u-shaped arm that reaches towards the right side of the presser foot. This foot will slide onto it and fall between the needle. You can secure it with the clip or lever that is present on the left side. Make sure that the foot is completely secured on the machine, and it doesn’t come off when you are stitching.

Step 3: Set Up The Machine

The next step is to start up your machine to begin quilting. After attaching the walking foot, you need to select the stitching. A running stitch is considered ideal for quilting. You can also adjust the length and width of the stitches on the machine. Make sure you choose the length and width according to the quilting pattern you wish to create. It is important to note that change in the stitches’ width will result in a change in the depth of the waves.

Step 4: Start Stitching

Once everything is set up, you can start the stitching process. It would help if you choose the right place to begin with. Everyone has a different preference when it comes to choosing the quilting side, to begin with. Center has always been a favored choice to get things done without any hassle. If you start from the center, you would not have to witness the bubbles or puckering. Start stitching from the center and reach out to the edges. When you reach the opposite edge, start stitching edges and cut off the threads. At regular intervals per block size, you need to repeat the stitch with the current settings.

Step 5: Finishing It Up

Once you have quilted at the preferred density, you need to finish the stitching process. Square your quilt and trim off the excess backing, thread, batting, bind, etc. That’s all you need to do for quilting with a walking foot.

All You Need To Know About The Walking Foot

Walking foot is versatile in all senses. Whether you have stitching requirements or decorative purposes, a walking foot will help you in all the areas. Knowing more about walking foot is essential to understand what it is capable of and not. Here are a few pointers about walking foot that you must keep in your mind for your further sewing endeavors.

  1. A walking foot is highly beneficial for machine quilting. A quilt is sandwiched between 3 layers of fabric: the inner batting, the quick batting, and the bulky layers. Walking foot can easily move around and feed the quilt easily than any regular presser.
  2. Walking foot is particularly better for the bulkier fabrics that are hard to maneuver with other presser feet.
  3. If you want to make smooth curves, walking foot might not be the right fit. It is the best suitable for the straight line and forward stitches. It would be challenging creating free motion quilting.
  4. A walking foot will also help in sewing the binding to quilt. Sew binding involves layers of fabric, and walking foot will prevent the layers from shifting from their place.
  5. You should always use a walking foot when you are working with matching plaids, patterned fabrics, and stripes. When you have pinned your fabric together, this walking foot will ensure that your fabric never shifts from the place, and you get smooth stitching.
  6. Almost all the sewing machines come with a walking foot. In case your sewing machine doesn’t have a walking foot, you can connect with the machine dealer to get it separately. Some vintage model sewing machines do not have a walking foot. There are different types of the walking foot that vary according to their price. Invest according to your purpose of sewing.

Can You Free Motion Quilt With A Walking Foot?

A walking foot is preferred for quilting because with this foot; you can ensure evenly distributed stitches. The walking foot feeds in the quilt into the machine evenly without leaving any uneven space. However, you need to worry a bit regarding the smooth curves when it comes to free motion quilting. A walking foot would not be able to create the smooth curves that a free motion quilt requires.

Can You Backstitch With A Walking Foot?

Walking foot is a versatile accessory to most stitches, but it may disappoint you when it comes to backstitch. Walking foot is used for all sorts of forwarding stitches, and backstitching is something where you need to stitch backward. There are chances for modifying it by changing the stitches’ size, but you cannot use a walking foot completely for a backstitch.

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *

SewingMachineBuffs.com is participating in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
The Amazon Services LLC Associates Program is the leading selling program on the Internet, with hundreds of thousands of members.
shares