Home > Beginners > Do You Need Special Fabric For Cross Stitch

Do You Need Special Fabric For Cross Stitch

Are you a sewing expert? Does stitching in your pastime allure you? Well, if your answer to these questions are affirmative, then you will definitely love the art of cross-stitching.

The art of counted-thread embroidery has popularized cross-stitching to a great extent and these X-shaped stitches have beautified numerous table-cloths, doilies, and household linens.

However, there are times when stitching enthusiasts experience hiccups while framing their cross-stitching pattern on a cloth. Questions arise regarding the usage of fabrics, type of threads, which pattern to choose, and several other aspects.

Well, we ask you not to worry! Here’s good news for all stitching enthusiasts, as we walk you through the most crucial question associated with cross-stitching.

Do You Need Special Fabric For Cross Stitch?

Yes, although you can do cross stitch on any material or fabric, most cross-stitch work is done with Evenweave and Aida.

The difference between these two materials is that Aida is a lot stiffer. It stands out as a perfect option for individuals who are doing cross stitching for the first time.

On the other end, Evenweave is a type of material, which is flexible and soft at the same time. Working on these two fabrics to cross-stitch will provide you with the best results.

Why Do You Need Special Fabric?

Although there are quite a few fabrics available for cross-stitching, and you can choose amongst them, Evenweave and Aida are the two most important ones.

The main reason to use Aida and Evenweave for cross stitching is because these two materials are weaved evenly. They have different counts, and the higher the count is, the smaller your stitch will be.

Quite naturally, that makes the stitching process easy for you. All you need to do is know the individual processes to cross-stitch on these special fabrics like Aida and Evenweave.

Ways To Cross Stitch On Special Fabric

When doing cross-stitch work on Evenweave and Aida materials, the process is pretty simple and easy.

There are steps you need to follow to do cross stitching on these two materials. To know how you can do so, check the information below.

Cross Stitching On Evenweave

Working on Evenweave might be a little challenging compared to Aida, but it’s not that difficult, you think. Here are the steps you should follow.

Step 1

Begin your work from the bottom right corner of the fabric. Rather than jumping directly towards the hole, skip out the middle hole when doing the cross-stitching work diagonally.

Step 2

After that, you must take another corner, which is the bottom left. Make sure to skip out a hole and come towards the bottom left corner of the fabric. It should be within the line from where you started.

Step 3

Now, you have to travel towards the last corner diagonally. You can opt for the top right corner as your previous corner.

Like the other two steps, you have to skip the middle hole and then travel down to complete the X shape.

When you create the X, you will encounter that all the middle holes within the tiny square are vacant.

This stands out as the perfect way to know that you did the work correctly.

Step 4

Now, you have to repeat the first three steps. Once you find several of the stitches, the process will become a lot easier for you.

But if you want to do a railroad stitch, you must begin from the bottom left corner, and reach the top right and replicate the process once you get the row’s end.

Cross Stitching On Aida

When it comes to cross stitching on the Aida materials, the threads are bundled up together, which creates a square pattern on the fabric. You can check out the steps given below.

Step 1: Gather Your Materials

Before starting the cross-stitching work, you must collect all the materials that you need for the project. The things you are:

  1. A pattern.
  2. The frame or a hoop.
  3. Sharp scissors.
  4. The Aida material.
  5. Threads.
  6. Needles.

Once you have all the materials or things, you are all ready to start the work.

Step 2: Get Your Material Ready

To prepare for the stitching work, there are two ways you can do so.

For The Hoop

If you are using a hoop, you have to measure the required size of the fabric. After that, you must add around 2 inches to 3 inches on top of all the dimensions.

When you are done, fold the material in half, fold it again to another half and give the material a good press along the edges. Open up the folds, and you will find two lines that denote the fabric’s middle part.

Put the smaller hoop on a hard surface and put the material on top of it. Doing so will place the middle of the fabric right at the center of the hoop.

After that, loosen up the bigger hoop by simply unscrewing it. Place the hoop right on top of the bottom hoop and the material.

Now, you have to tighten up the screw located at the hoop’s top area without lifting it.

For The Frame

If you are using the frame instead of the hoop, you will require more fabric. You need to add 6 inches to 9 inches in one dimension and 2 inches to 3 inches on the other.

When you cut the material, you need to fold the fabric in half and then repeat the process once again. When you open up the fold, you will find two folds marking at the material center.

Now turn up the slightest edge and place the material right on the top area of the frame. After that, you need to screw or push over the frame.

You must twist up the frame so that the material covers only the frame’s far end. Make sure to replicate the technique of screwing or clipping the material’s edge of the frame.

Until you have the center area of the fabric right in the middle of the frame, twist the edge one more time.

Step 3: Begin The Stitching Work

When doing the stitching work, always take two strands of thread. Take up one strand of the thread and hold on to the ends of the two strands. Doing so will help in creating a loop.

Pass the two ends of the thread right through the needle’s eye carefully and gently. After that, enable the ends of the thread to fall halfway down the loop’s length.

Find the fabric’s center by locating the position of the two folds. When you take a look closely, you will notice that the material has multiple holes.

Choose a hole, which is located pretty close to the center part. You must enable the thread to pull around two-thirds of the way.

Now, you must take up the thread and pass it through the top right hole. For the first attempt, you need to place the material over.

You have to pass the needle right through the tiny hole within the thread and make sure to repeat the process around one to four times. Also, you need to repeat the same process from the other side.

When you do it this way, you will not use much thread, and the final results will look a lot better. If you do it correctly, it will provide you with the perfect X shape on the material.

Other Fabrics You Can Cross Stitch On

When it comes to doing cross-stitch work, you can use the technique on various other fabrics, apart from Aida and Evenweave. These materials or fabrics are:

  1. Hardanger

Hardanger stands out as a 22-count Evenweave and 100% cotton material and has originated in Norway.

This material is woven with a double thread, and each double-thread group gets added as one.

When you use the Hardanger material for your cross-stitch work, it will work perfectly on two thread groups. The results will come out in 11 squares per inch.

Hardanger is available in a limited selection of shades or hues. If you cannot find Hardanger fabric, you can use Oslo as a replacement.

  1. Ready-Made Products

When you have decided to do some cross-stitch work, you can opt for the numerous ready-made products available in the market.

The customized ready-made sheets, blankets, pillowcases, and places are ideal choices for doing cross-stitch work.

You can also use embroidered napkins and create your favorite designs and patterns. Using ready-made items will allow you to decorate your home uniquely.

  1. Toweling

By-the-yard and ready-made towels are also one of the best options for cross stitch-related work. They come in numerous colors, and you can easily use them for your retro and new projects.

Using the towels will enable you to create beautiful and eye-catching designs, and you can either use them as home décor or give them to someone as a present.

How Do I Prepare Myself For The Cross Stitch Work?

To prepare yourself for the cross-stitching project, you must properly plan your project. Write down the things you need to stitch and the areas you wish to design right before starting your work.

After that, you must gather all the necessary items or products, which you will need for the cross-stitch work. If you don’t have some things, get them from a nearby crafts store.

Along with that, wash your material well, secure and cut down the fabric edges, and sort out all your embroidery threads.

Can I Benefit When I Use The Aida Fabric For Cross Stitching?

When using the Aida material for all your cross-stitch-related work, there are several benefits you will get.

Using the material will provide you with square stitches, and you easily see where you need to place the needle. The material stands out as a perfect choice for created gingham, tartan, and check designs.

When you do cross-stitch projects on the Aida fabric, it will not take much time. Also, the material will not fray away when compared with Evenweave.


Hello, I am Jessica Flores, and you are welcome to my website. I am a professional fashion designer and a seamstress. I always carried a passion for craftwork. My love for craft grew along with time. I have spent years researching and practicing in this field to gather colossal experience.

Leave a Reply

Your email address will not be published. Required fields are marked *

SewingMachineBuffs.com is participating in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
The Amazon Services LLC Associates Program is the leading selling program on the Internet, with hundreds of thousands of members.