Pillows are such an aesthetically pleasing and comforting addition to your home décor. And if you couple sews pillows, you have a perfect, cost-effective way to add character to your space.
Making pillows is not as hard as you think. if you know the right technique.
In this article, we are helping you to know how to sew a pillow cover with a zipper and piping.
How To Sew A Pillow Cover With A Zipper And Piping?
Start by cutting the fabric into the desired size and fold it one inch towards the wrong side.
Thereafter, sew the stitch in place, keeping it close to the fold.
Moreover, after turning the fabric over, align the other side of the zipper tape towards the upper backside piece. The last step is to create a small folding flap to cover the zipper area.
Tips To Sew Pillows Perfectly
Following are some tips that you should know before sewing a pillow-
Use Good Quality Fabric
Choosing a good-quality fabric is the best way to make your pillows look like store-bought. We recommend using home décor weight fabric of cotton sateen. Moreover, if you choose quilting cotton fabric, then you would need lightweight fabric as an interface. This is important to get the right weight of the fabric to make an excellent envelope pillow.
Get Precise Cutting
Make sure you cut the front and back of the pillow exactly the same. This is one of the common mistakes that beginners often make. They generally keep the front fabric an inch or two bigger than the back to get seam allowance. But in the end, you will get saggy pillows rather than good-fitted ones. However, keeping the size of the fabrics will make sure that you get snug-fitted pillows. You want to make sure that the pillow corners are nicely tight to get a crisp look.
Clip The Corners
Attention to little details is what separates homemade pillows from store-bought ones. And here is a tip that will also help you get a professional look at the end. Clip the excess fabric inside of the pillow. This will make sure that the corners come out clean and crisp.
Align The Fabrics At The Seams
This is a process that requires you to invest more time and a little more fabric, but the end results will be worth your efforts. When your fabric matches the side seams and at the pillow back, the pillows look cleaner and more professional.
Go For Feather Insert
The great thing about feather inserts is that they are inexpensive and look great. Even if the feathers start to fall down to the bottom, simply shake them a couple of times, and you are good to go.
Keep The Stitch Length
When you are stitching pillows, you want to keep the length of the stitches small. This is because larger stitches will show at the seams, and they will untidy.
Steps To Sew A Pillow Cover With Zipper And Piping
Step 1.Start by cutting the fabric to the desired size. Here we are cutting out the fabric in 20.5 x 20.5 inches. Additionally, also cut a lower back piece at 20.5 inches x 15 inches. Lastly, cut an upper back piece at 20.5 inches x 8 inches.
Step 2. Fold the lower back fabric at the longer edge around 1-inch towards the wrong side and iron it. This will keep the fold flat.
Step 3.Measure out how long you need the zipper to be and ensure that you have a zipper until the very end. Once you are sure of the size, cut the zipper at the desired length. Additionally, you can stitch across the open end of the zipper. This will ensure that the pull stays put on the zipper.
Step 4.Place the folded edge with the right side up against one edge of your zipper tape. Make sure the tape lies very close to the zipper teeth. Stitch the zipper close to the fold using the zipper foot on your sewing machine.
Step 5.Turn over your fabric and align the other side of your zipper tape towards the raw edge of the upper back piece. When both the sides are aligned, start stitching close to the teeth.
Step 6.Now open the fabric out, keeping the right side up, and iron the fold flat. Make sure you iron the fold quickly as you do not want the zipper to melt under the heat.
Step 7.Keeping the fabric side up, we will now create a folding flat to place over the zipper area. This way, the zipper will not be visible, thereby providing you with a clean look.
Take a little fabric and fold it towards the right while keeping it over the zipper. You can either mark the fabric or lay the fabric over the zipper and check the alignment with your fingers. Furthermore, make sure the fabric flap is too small or too large.
Step 8.For the last step, turn over the fabric and stitch it closely to the teeth once more. Moreover, you will also need to secure the ends across the zipper to complete the finishing look.
Piping The Pillow The Professional Way
Now that we have learned how to sew the zipper in the pillow let’s learn a bit about piping the pillow:
Step 1.Start by piping the outer edges of the pillow. This will ensure that the piping is aligned with the seam allowance of the pillow. Make sure you leave a couple of extra inches where you can start to unpin the piping.
Step 2.Cut the slits into the seam allowance of your piping. When doing this, make sure that you do not trim the main stitching, which is holding the piping securely. There should be enough slit so that the corners remain flat and smooth.
Step 3.After clipping the corner, pin the piping along the corner. If your piping comes across a little bunched, it is okay as you will flip it out to the outside.
Step 4.After putting the piping across the corners, you might have some piping left. Leave a couple of extra inches unpinned.
Step 5.Now it’s time to sew the piping on. Using your zipper top, start stitching on top of stitching where piping is placed. Keep the stitches exactly against the rounded parts. If your sewing machine has a dedicated piping presser foot, then you can use the same.
Furthermore, sew where the two ends of piping are connecting. Start sewing the piping to the pillow, keeping it as smooth as possible.
Step 6.When you come to the corner, slowly stitch makes sure you align with the piping stitches. Ensure that the piping is in the right place to get a smoothly rounded corner. Keep the length stitch short so that you get more precise curves.
Step 7.Once you have stitched all the way around, take the rest of the extra piping from the end and overlap it on the top where the piping starts. There should be a little V where the two points meet. Trim off the extra piping so that they match with the fabric’s edges.
What Is The Difference Between Piping And Binding?
The terms piping and binding are used interchangeably, but they are not the same thing. Piping is used mainly for decorative purposes, whereas binding is done to get clean finish edges.
While in binding, you can see the stitches clearly, piping does not show any stitches.
Moreover, the objective of piping is to make the seams appear stronger and minimize the slippage. On the other hand, binding is done to get clean-looking edges of the fabric.
Can You Sew Piping Without A Piping Foot?
Typically sewing machines have a zipper foot. You can use this setting to put in the piping, so you do not need any additional feet. However, you can invest in the piping foot, which will make the piping process simpler to do.
- How To Sew A Pillow Cover With A Zipper And Piping?
- Tips To Sew Pillows Perfectly
- Steps To Sew A Pillow Cover With Zipper And Piping
- Piping The Pillow The Professional Way
- What Is The Difference Between Piping And Binding?
- Can You Sew Piping Without A Piping Foot?