Home > Beginners > How To Tie Off A Stitch

How To Tie Off A Stitch

When it comes to tying off a stitch, you can do so by simply putting up a knot at the end. You can only place a knot when you stitch with your hands.

If you are doing stitching work with a sewing machine, you can tie off the stitch through the lock stitch option available on the sewing device itself. Once you use that option, the entire tying-off work will start automatically. You do not have to do anything manually.

Tying a stitch right after you have completed stitching work is pretty simple and easy. But through this article, you will learn and understand in detail how to do so.

How To Tie Off A Stitch?

Even though the process is not that difficult, you have to understand and follow all the steps correctly to receive a positive outcome. There are several ways through which you can tie off the stitch. Let’s check them out!

1. Tying Off The Double Thread

Double thread stands out as the best option when it comes to hand sewing. It helps in making all the stitches more stimulating, and you can easily tie them off. Here are some of the ways you can tie off the double thread.

Step 1

Conclude your final stitch, and be sure to leave out some amounts of thread at the end of the row. It’s because you will need this string to make the knot.

Step 2

Divide the two strings. Please take one of the strings and bring it atop the other one and then go under it.

After that, you need to pull the thread and bring it to the edge of the material. Do not think of pulling thread way too casually, as it might wrinkle the stitches.

Step 3

You need to redo the process of Step 2 and then pull the knot tightly.

Step 4

If you want to make an extra knot after completing the first one, you are free to do so. Many individuals make two or three knots as well.

Step 5

Once you make the knot, you can cut off the string end with no hassle.

2. Sensing Off The Finishing Stitch

This is another way of tying the double thread, which will not secure the stitches perfectly. Have a look!

Step 1

Once you finish your stitches, you should leave out some jots of thread.

Step 2

Take your needle and bring it down right through the material at the ends of the final stitch. It will be better to pull too tightly and leave behind a ring instead.

Step 3

Now, you have to take your darner upwards, and it should be pretty close to the area from where you brought the darner down.

Step 4

You need to put the darner through the ring you created and pull it down into the mater, slowly and gently. Make sure not to pull tightly and try to leave out a tiny circle.

Step 5

Finally, you have to take the darner through that tiny ring one more time and give it a last pull.

Step 6

The only thing you have to do is cut down the ends of the thread.

3. Tying Off The Backstitch

Under this particular method, you have to utilize the preceding stitch that will help in securing the finishing stitch.

Step 1

When you are all done with the last stitch in a row, you need to leave out some tittles of thread at the very end.

Step 2

Now, you have to take your darner downwards towards the last stitch and make a circle.

Step 3

You have to put the needle through the circle and pull it to create a knot and sinks well within the material.

Step 4

If you want to secure the stitched row, you have to replicate Step 2 and Step 3 and generate another knot.

Step 5

Once the work is done, you can cut off the thread ends with a scissor.

4. Knotting Off The Back Tack

The back tack, also known as the end-off backstitch, stands out as an excellent way to tie off a hand-stitched row within a particular material. Check the steps below!

Step 1

Leave out some bits of thread at the end after closing the stitching work.

Step 2

You have to need to bring the needle around and then put it back into the material right after completing your last stitch.

Step 3

Take the needle and go back up within the material. It should be adjacent to the edges of your stitches.

You will get a circle through which you need to move the needle and pull the thread mildly. Doing so will enable the thread to settle down within the material with no issues.

Step 4

You have to replicate Step 2 and Step 3 two more times for this step, but don’t pull the last loop too tightly.

Step 5

Now, cross the needle through the last loop and pull it tight to open.

Step 6

You have to remove the extra thread after building the knot.

How To Tie Off A Single Thread After Stitch?

On certain occasions, many people want to opt for the single thread of the double one.

When you want to tie off the single thread stitches, you can do them through rear tack, and the finishing stitch procedure. But you can also follow the method provided below as well. Check it out!

Step 1

When you complete the stitching work, try to leave at least a bit of thread as you will need it for making a knot.

Step 2

You have to take the needle towards the ultimate stitch, and like you would do for a back tack or a backstitch.

Step 3

Put the needle right through the last stitch and pull the thread gently to form a circle.

Step 4

Pass the needle right through the circle and do that again.

Step 5

Finally, you have to pull the ligatures tightly and get rid of the excess threads.

The Process Of Tying Off On A Felt

When you have decided to tie off on a felt fabric or material, you might want to hide or cover up the ends of the threads. Whenever you sew with felt fabric, you will only sew in the area where all the stitches will be pretty much visible.

You tie a regular knot and try to butt the knot against the felt in the best way possible. Move the needle right beside the knot and bring it out in the center of the felt.

Remember, the needle has to be at the center of the two layers of the felt. Now, pull the ends of the thread tightly and discard the extra thread with a scissor.

Once you let go of the ends of the thread, it will shrink or disappear inside of the felt. This will hide all the thread ends and provide you with a clean and easy knot.

The Method To End The Stitch Through A Sewing Machine

When you want to complete a stitch with a sewing machine, the process is pretty straightforward. You have to cut down the threads located close to the material, but not the needle.

If you try to cut the thread located close to the needle, you might pull out the thread. That is why, when you cut down the threads, make sure to do it carefully so that you can avoid unwanted errors from occurring.

Can You Tie Stitches Through A Sewing Machine?

Yes, you can. With the stitching device, you can easily tie off or secure the stitches in a hassle-free manner. There are several ways to do so.

Creating A Lockstitch

With the lockstitch technique, you can quickly secure all your stitches through a sewing machine. Look below!

Step 1: You must sew around 3 stitches to 5 stitches on a sewing machine and stop the stitching work.

Step 2: Reverse those stitches and stop the stitching.

Step 3: Sew over the stitches and again.

Step 4: When the sewing work, eliminate the threads.

Utilize The Auto Finish Method

Sewing machines that come with the lockstitch option can automatically commence the stitching with no hassle. This means you don’t have to do the entire stitching manually.

You will also come across some advanced machines that come with the lockstitch feature but will give you the chance to program it. This will allow you to conduct a chain of stitches for the lockstitch work.

What To Do If The Ending Stitches Come Out Loose?

If you are using a sewing machine, and the ending stitches have become loose, you must do some back stitches.

But you have to do these back stitches before you do the end stitches. Doing so will perfectly secure the stitches, and it will not interpret anytime soon.

Observe all the measures and instructions provided on this document carefully when you want to secure or tie off your stitches.

Jessica

Hello, I am Jessica Flores, and you are welcome to my website. I am a professional fashion designer and a seamstress. I always carried a passion for craftwork. My love for craft grew along with time. I have spent years researching and practicing in this field to gather colossal experience.

Leave a Reply

Your email address will not be published. Required fields are marked *

SewingMachineBuffs.com is participating in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
The Amazon Services LLC Associates Program is the leading selling program on the Internet, with hundreds of thousands of members.