How To Thread A Zig Zag Sewing Machine

September 26, 2023October 16, 2023 Jessica 0 Comments Zigzag Stitch

Threading a zig zag sewing machine is a lot easier than you think. You have to load first the upper thread and the lower thread within the machine. The sewing machine will start weaving these two threads to make stitches in your fabric.

All zig zag sewing machines can be slightly different from each other. But they do employ the same steps when it comes to threading. Correctly threading your sewing machine will make your stitching work easier.

Are you using the zig zag sewing machine for the first time? Need some help with the threading part? Allow this document to be your ultimate guide.

You will find all the information you need on threading a zig zag sewing machine in a hassle-free manner.

How To Thread A Zig Zag Sewing Machine?

Contents

How To Thread A Zig Zag Sewing Machine?
Can You Do A Zig Zag Stitch On A Zig Zag Sewing Machine?
Is It Possible To Do Other Stitches On A Zig Zag Sewing Machine?

The steps to thread your zig zag sewing machine is not that difficult to follow. They are pretty simple, and you need to understand them well and follow them accordingly. These steps are:

Step 1: Wind the bobbin

The bobbin stands out as the lower spool of the thread of the machine. When the bobbins of your machine are not wind-up threads, you need to get it done from an existing spool of thread.

You need first to place a spool of thread on the threaded pin of the sewing machine. Draw the thread towards the left side of the machine. After that, you wind it up in a counterclockwise motion around the pre-tension disc.

After that, begin threading the thread through the holes located within the empty bobbin. Make sure to wind the thread multiple times around the bobbin’s center pillar.

You can then place the bobbin on the bobbin’s winder pin. Now, you need to press on the foot pedal of the zig zag sewing machine.

This will allow the bobbin to start winding and make sure to wind until it’s complete. Once it’s done, you can trim out the extra thread to detach from a larger spool.

Step 2: Load up the wound bobbin

When you have a wound-up bobbin, it will go into the small compartment located underneath the needle. Doing so will help in supplying the lower thread as the zig zag sewing machines keep sewing.

If you want to load the bobbin, lift the presser foot and the needle to the highest level and remove the cover of the bobbin. You can place the bobbin within a round slot.

The zig zag sewing machine has an arrow that will tell you how you can place the bobbin to unspool. After that, you can put the end part of the bobbin thread right through the sewing machine’s tension spring. This will enable you to replace the bobbin once and for all.

Step 3: Place the spool of thread

Now, let’s set up the upper spool of the thread of the machine. You must set a spool of thread on the thread’s pin of the machine. This particular pin also goes by the name spool holder or spool pin.

Step 4: Thread through the thread guide

After you pull the thread on the left side of the machine, you need to thread it right through the thread guide.

Step 5: Pull up the thread through U-shape guide

Pull the spool of thread right through the thread guide within a deep groove at the front of the zig zag sewing machine.

After that, you have to bring back the thread towards the second deep groove located on the left side itself.

Step 6: Wrap up the thread around the take-up lever

Right at the top of the sewing machine’s second grove, you will encounter a metal hook that goes by the same take-up lever. Now, you must wrap the spool of thread around that take-up lever.

Step 7: Thread the needle

Try to pull the thread downwards towards the zig zag sewing machine’s needle. You need to thread up the needle’s eye from the front to the back.

You need to keep pulling the thread until and unless several inches of thread went right through the needle.

There are many machines out there that come with an automatic needle threader. If you possess a machine with such a feature, check the manual of the sewing machine to learn more.

Step 8: Catch the thread

When the bobbin and the top thread are in place, you have to link the two threads together. Doing so will enable you to sew.

Using the knob, needle position, or button, lower down the needle and then go straight up again. Doing so will enable the needle to get the bobbin thread and pull it out through the loop.

You can pass a flat item, something like a ruler right underneath the needle to grab unto the thread strands. After that, you can easily position them when you start the stitching work.

Can You Do A Zig Zag Stitch On A Zig Zag Sewing Machine?

You can easily do a zig zag stitch with no issues through a zig zag sewing machine. The process is not that difficult, and with a bit of guidance, you too can do a zig zag stitch like a pro.

So, when you are pretty much interested to learn it, let’s check out the steps on how to do the zig zag stitch through the zig zag sewing machine. They are:

Step 1: Thread the needle and bobbin

To begin the stitching work, you must typically set the sewing machine as you do. After that, you have to usually thread up the needle and bobbin and prepare the machine to use it.

You need to keep in mind that the thread tension is not that firm, but it should not be that tight as well. When the tension is way too tight, it will break the thread.

Also, you are free to use any type of thread according to your needs. Since the zig zag stitch stands out as a decorative one, so you must go for threads that come with contrasting shades. Such threads will produce some attractive outcomes.

Step 2: Set the machine up to a zig zag setting

The zig zag sewing machine will show you what the zig zag setting is right on the machine itself. Otherwise, you have to follow the instructions provided in the manual.

On many sewing machines, the zig zag setting represents the straight down and up zig zag stitch. This stands out as the zig zag setting for the regular one. It will be better to opt for this setting than the one with a bit of slant to it.

Step 3: Adjust the length and width of the stitch

When it comes to adjusting the width and length of the zig zag stitch, try to stick with the default setting itself. Otherwise, you are free to change it according to your requirements.

Remember, the width points towards the peaks within the zig zag stitches. On the other hand, the length refers to how far each zig zag stitch will be from each other.

Step 4: Insert the material and lower down the presser foot

When you are set to do the sewing work, place the material underneath the presser foot and lower it down on the material itself. Doing so will help in holding the fabric while you sew.

You must hold the material right in front of the presser foot and also behind it to properly guide it. Don’t pull the material but have a good grip on it.

Step 5: Turn the handwheel 1 or 2 times and press the pedal

When you are sewing, it will be better to turn the handwheel at least once or twice to begin the stitching work. After that, you must slowly press on the pedal and start the sewing machine.

Hold the material as you sew so that you can quickly assist it into the machine. Do not press on the pedal too hard. When you sew too fast, the stitch will look sloppy instead of clean.

Step 6: Sew till the fabric’s end and don’t double up

Zig zag stitch stands out as a decorative and robust stitch, so you don’t need to go over the material more than once. If you do so, it might strengthen the seam further and not look good when you double it.

Step 7: Tie the ends with a knot and trim out the excess fabric

Once your zig zag stitch is completed and reaches the end of your material, cut down the thread a few inches away from the material. After that, you must tie up the rear in knots and secure the thread. Make to cut or trim the extra thread, and your zig zag stitch is completed.

Is It Possible To Do Other Stitches On A Zig Zag Sewing Machine?

In short, yes, you can do it. The zig zag sewing machine will not do just one type of stitch. You can make a straight stitch, embroidery, edge-over, bartack, pattern sewing, and connection.

You can also sew zippers and wait for cover. The machine comes with a multi-functional operational panel and will provide you with accurate sewing.

Author
Recent Posts

Jessica

I'm Jessica Flores, a professional fashion designer and an expert seamstress.

Crafting has always been a deep-seated passion of mine, one that has flourished and evolved over the years.

I've dedicated considerable time to both studying and practicing in the realm of fashion and sewing, amassing a wealth of experience and skills.

It brings me great joy to share these insights and experiences with you all, hoping to inspire and foster a similar passion for the art of sewing.