How To Fix Frayed Sweatshirt Cuffs
Fraying can happen in cuffs or around the neck area, or any other parts. Due to this, the thread comes out, and you cannot wear it. If you do not fix it for the first time itself, the complete dress will get spoiled.
Several methods are there to fix a frayed sweatshirt cuff, after which it will look new. The process to do it is also simple and does not consume much time.
Most importantly, you can do it at home using a sewing machine or by hand. This guide will explain to you the step-by-step procedure of fixing a frayed sweatshirt cuff.
How To Fix Frayed Sweatshirt Cuffs?
- How To Fix Frayed Sweatshirt Cuffs?
- Aspects To Keep In Mind While Fixing Frayed Sweatshirt Cuffs
- Is The Above Process Will Help In Fixing The Frayed Sweatshirt Cuffs Properly?
- How Much Time Does It Take To Complete The Entire Process?
When you fix frayed sweatshirt cuffs, you have to place the paper and sketch the pattern. After that, you must cut it out and use it to tie off the threads.
As you complete the process, you will find what the cuffs looked like before, and you can wear them now. For example, fixing a frayed sweatshirt cuff is easy, and similarly, if required, you can do it with a collar.
Also, to start the process, you do not need any extra tools. The things that are available for sewing would be sufficient to carry out the process.
Be with us to the two different processes and a few FAQs which will help you further.
Things Required To Fix Frayed Sweatshirt Cuffs
A few things are required that you will be required to fix frayed sweatshirt cuffs, and they are:
Sewing Machine: First, you will need to have a sewing machine as hand stitching does not look neat. Also, if the fabric is heavy, stitching will be difficult with your hands, but you can do it easily in the sewing machine.
Have Sufficient Pins: You must have sufficient numbers of pins that you will require to pin the cuffs before stitching. It keeps the cuff in place so that you can stitch in line with the garment.
Steam Iron: It is a must as you have steam at times between the project when required. So, if you have one, you can steam the wrong side of the garment.
A Piece Of Paper: You must have a piece of paper when you draw the pattern. After that, you can cut out the design by following the pattern and use it for stitching.
Same Color Thread: You must have a matching thread to stitch the cuffs. Using A different color thread will make the fabric look inappropriate and spoil the look. So, before you begin stitching, you must make sure that you have a similar color of thread to the sweatshirt.
There are two methods to follow for fixing frayed cuffs. Here’s a detailed explanation of both of them.
Method 1: The Easy Process To Fix Frayed Cuffs
Step 1: First, take a piece of paper, and you must place it below the cuffs and draw the pattern. It would help if you drew properly so that the sizes and designs come properly.
The cuff is attached to the fabric, so you have to take the measurements. The pattern has to be equal on both sides.
To check that, you have to “fold half down the center back and alter,” and the same thing should be done on the sweatshirt.
After that, add a 1 cm seam allowance on all sides around the pattern. If the pattern already exists, you must keep it in the right position to use for decoration.
Step 2: Take the fabric and place the pattern, and it should be in line with it. Now cut it out, and it should be of the same size.
Step 3: Now, take your steam iron and press over the 1 cm seam allowance back from all the sides. You will be on the wrong garment side so that all edges will get hidden.
Step 4: After the piece is in the correct shape and size, you must pin it into the fabric. It would be best if you did it in such a way that it is precisely in the perfect position. The pin should hold it tight not to move when you are stitching in the sewing machine.
Step 5: After that, take a matching thread, and it should be of small length for straight-stitch. Now, using the sewing machine, you can start sewing the cuff area.
Do not hurry up and do it slowly, so the stitch line is even. It should look proper all around the cuff.
Step 6: On the wrong side, you must tie off the loose threads of the sweatshirt and trim the extra ones.
Step 7: Now, you should press the cuff to keep a clean look to it.
Method 2: Putting Bias Binding And Fixing The Frayed Sweatshirt Cuffs
Step 1: Pick the bias binding that works properly on the design of the shirt, either contrasting or matching.
Step 2: Cut it to the exact length of the piece to cover, keeping 3 cm. It will help to create a seam allowance at the other end.
Step 3: Now press it half in lengthways to wrap over the edge you want to cover.
Step 4: Along the edge, you must fold the garment that you want to cover. After that, you must pin it so that moving is impossible.
Step 5: On both ends, you must fold the binding to create a proper and neat edge so that fraying is not visible. This cannot look easy to you, but securing it with pins will be easy for you.
Step 6: Now, you must use a matching thread and a medium-length straight stitch on the sewing machine.
Start working on the fabric’s right side and lower the needle and start binding 1 cm from the end.
Step 7: Before you start to do, you must lift the sweatshirt and check if the needle has gone via the binding. In case you are too close to the binding edge, you must take the needle out and fix the position.
It is better to have some distance not to catch all binding.
Step 8: Before you start stitching, you must lift the needle and begin the reverse stitch to the binding end. Using a forward stitch, you have to follow the same.
When you start sewing, you must do it slowly and continuously without giving a pause. After you do a few stitches, you must check the beneath of the sweatshirt. It should be in line with the stitch.
Step 9: Repeat the process while going all along the binding and secure the stitch. Now you must take off the extra threads, and there is no need to tie it off.
Step 10: After that, you can press the sweatshirt to keep a proper finish to it.
Aspects To Keep In Mind While Fixing Frayed Sweatshirt Cuffs
Make Simple Adjustments: You have to make simple adjustments in between while stitching. You should keep this aspect in mind and do it to get a result.
Maintaining The Seam Allowance: The seam allowance needs to be maintained, and it should be even around the fabric. While stitching, if you find that the seam allowance is not maintained uniformly, you must take out the stitches and do it again.
Cut The Extra Threads: After you have completed stitching the entire thing, you must cut the extra threads that come out. It is done after you complete stitching the cuffs.
If you need, you can iron the fabric on the wrong side. It will help you get a plain surface, and the stitching will be easy. While stitching, you must do it in continuation without stopping in between.
If you stop, it breaks the flow, and also, in the end, the stitch won’t be uniform. So while you carry out the process, you should keep all these aspects in mind.
Is The Above Process Will Help In Fixing The Frayed Sweatshirt Cuffs Properly?
The above process will help in fixing the frayed sweatshirt cuffs properly. It is easy, and you can do it by following any of the two procedures. It can be used on any clothes where the thread has come out.
Also, you do not have to visit any store and spend money to fix it. If you have a sewing machine at home, you can do it quickly. After stitching, the sweatshirt will offer a neat look like before.
How Much Time Does It Take To Complete The Entire Process?
The entire process does not take much time, and you can do it in just an hour or so. The process is simple, and you only need to have the materials to start with.
Once you have the products with you, you can start stitching the cuffs, and with that, you can complete the process. Ensure always to maintain the seam allowance, and the stitch should be in line throughout the garment.
It should be uniform; otherwise, the cuffs won’t look proper. While pining, you should see if it is in line throughout and then start stitching.