The perfect way to use a sewing pattern is without cutting it. To create it, trace the original in the specific size as required. Only a few people are aware of this technique, which is why you should read through this content.
We have included the process of using a sewing pattern without cutting it. Understand the process, following which you can continue doing it without cutting.
How To Use A Sewing Pattern Without Cutting It?
- How To Use A Sewing Pattern Without Cutting It?
- How To Use A Sewing Pattern By Tracing The Pattern
- How To Use A Sewing Pattern By Tracing On Top Of Paper
- Best Ways To Prepare A Sewing Pattern
- Tips To Remember While Tracing
- How To Create Your Clothing Patterns?
- What Is The Necessity To Opt For A Sewing Pattern Without Cutting?
- Are Sewing Patterns Without Cutting A Good Alternative?
Sewing patterns are expensive if you wish to buy them any day. Also, if you buy a pattern which does not fit your requirement, it becomes a waste. That’s why; some people prefer creating them at home.
At times, it happens that you have cut a pattern, and then you found it is smaller in size. As a result, you have to make a new pattern over again. By doing so, you are wasting a lot of time and material.
Thus, it will be better to prefer using a sewing pattern without cutting. However, if you are unaware of this concept, do not feel ashamed, as many people do not know.
We decided to enclose details on how to use a sewing pattern without cutting. In that way, you can make necessary changes according to the need without wasting any material.
How To Use A Sewing Pattern By Tracing The Pattern
Tracing the pattern is the right way of sewing, and it gives you an opportunity to make changes as required.
Step 1. Trace the pattern that you wish to use by using white kraft paper. Getting this paper is not difficult as it is available in a local supply store or stationery shops.
Step 2. From small to big patterns to different shapes, you can trace everything on paper.
Step 3. Lay the paper over the pattern, and it should be thin so that the lines are visible. Carbon paper can also be used under the pattern, following which you can trace them onto kraft paper.
Step 4. You may find this to be a complicated one, so do it with white paper only. Make sure to place the pattern and the tracing paper on a flat surface, so there is no disturbance in doing it.
Step 5. If the pattern does not come out properly, your outcome will not be accurate. The final product is dependent on the pattern that you prepare on the whole paper.
Step 6. Remember to mark the number of cuts, darts, grainlines, and all other marks on the pattern piece. A tracing pattern can help you change the size without creating a mess.
Step 7. It is a perfect method to make patterns peculiar in shape and for which you will not get cutouts in the market. In a way, you do not need to look out for materials to create a pattern.
Step 8. When you have to prepare a new one, you can erase the previous one and create one on that. Tracing makes working with a more durable pattern which you may not get when you purchase from outside.
Step 9. Tracing will help in giving a lot of variety in preparing the patterns following which you can use in sewing. That’s why; always trace the pattern on the paper whenever you wish to sew something different.
How To Use A Sewing Pattern By Tracing On Top Of Paper
It is more complicated than the previous one, but you can try it out. After that, if you find it to be a better choice, trace it on top of the paper.
Step 1: Place the original pattern on top of the paper and use a tracing wheel to trace it. The tool has a spiked wheel that will help in tracing the pattern.
Step 2: Roll the wheel over the pattern, and the spikes will go through the pattern onto the paper below. Place a cutting mat below to avoid ruining the desk or table where you are doing it.
Step 3: Once you have traced everything, including the lines, pattern, and notches, the next step is to join them by drawing the lines with a pencil. It will give you the perfect pattern piece that you require.
Step 4: Use the pattern for sewing and see how the final product comes out to be. It will exactly look like the original one.
Best Ways To Prepare A Sewing Pattern
While preparing a pattern, a couple of things are there that you must do. It will help you in the process of preparing a sewing pattern without cutting.
Ironing is the most effective way of preparing the sewing pattern. Almost all patterns are made on normal printed paper or thin tracing paper. After that, layout the pattern gently over the ironing board and smooth out the creases over the top using a tea towel or cloth.
To ensure the creases are pushed out, the iron should be from low to medium, and it will help in following the sewing pattern lines.
- Smooth Out
If you are not comfortable with using an iron, smooth out is another choice to look for. Place the pattern and use your hands without putting pressure while moving. Putting too much pressure will cause rips, so avoid doing so.
In case you want to smooth out the pattern pieces on the chair back, leave it overnight. The next day you will see the creases have fallen out naturally.
- Different Patterned Paper
Different pattern papers are available that you can use for tracing purposes. They are tracing paper, tissue paper, and pattern paper. The papers you can use are:
- Ikea paper roll
- Greaseproof paper
- Prym dressmakers pattern paperHemline dressmakers tissue paper
- Hemline squared pattern paper.
Tips To Remember While Tracing
- Remember to note every single line and do not skip a small thing, as it will completely change the final product. It should have darts, tailors tacks, grainline, and fold lines.
- Use a pointed pencil or a fine pen, or else you might lose track through the paper. A fine pen will help in joining the dots and completing the pattern.
- If you find it confusing to follow the lines, you can trace using a color pen. It will help in highlighting the tracing pattern and lines. With that, your final product will be an exact copy of the pattern, just as you wanted.
How To Create Your Clothing Patterns?
Creating your clothing pattern can be done by tracing it on your paper. Once you have traced the entire pattern on the paper, you can follow that to prepare the final product.
The process of preparing the pattern is not difficult as you might have done it before at a young age to copy drawings. A similar concept is used here, and it gives you the flexibility to create several unique patterns.
What Is The Necessity To Opt For A Sewing Pattern Without Cutting?
Many people might be thinking when patterns are available in the market, what is the need to prepare one. Remember they are expensive and buying the wrong one can be a wastage.
When you create patterns without cutting, you can make changes on one without making wasting materials. Also, there is no cost involved as all the things that you require to do it are available at home.
Are Sewing Patterns Without Cutting A Good Alternative?
Yes, it gives you a choice to try out unique patterns that you will not get in the market. Hence, you can prepare unique things with it, which others may not have.
If you have never tried it out, you should follow the step-by-step process and do it. The process is simple and will not take much time to copy the pattern on paper.