Home > Embroidery > How Do You Keep Thread On Needle Embroidery

How Do You Keep Thread On Needle Embroidery

To keep the thread on the needle embroidery, you must tie a knot right after passing the thread through the needle’s hole.

Doing so will enable you to keep the thread within the needle with no hassle. The process might look a bit easy for some individuals. But for first-timers or beginners, it can be tricky.

Remember, threading the needle embroidery stands out one thing and keeping the needle on the thread is another thing. You can learn more on how to keep the thread on the needle embroidery through this article.

How Do You Keep Thread On Needle Embroidery?

When you are sewing or doing any embroidery work with your hands, you have to conduct plenty of movement with your needle on the material.

Make sure to keep your attention to the thread that remains on the needle, and it might slip off your mind easily.

There are some ways through which you can keep the thread on the needle embroidery. Check them out below!

1. Pinch It

Take the tail of the thread and pull it halfway down the knot and take the first stitch.

Once you pull out the needle from the material, hold onto the needle at the bottom, which is the opposite side of the pointed surface. It is the place through which you pass the thread.

Make sure to hold onto that particular area whenever you think of pulling the thread taut. Doing so will prevent the thread from getting pulled out. It will not go anywhere when you are holding the thread right at its place.

This might take some time, and you have to do a bit of practice to remember it. So, you must have patience with yourself on such matters.

2. The Double Duty

If the eye of your embroidery needle is significant, you can easily pass the thread through the eye, circling and securing it.

When you are circling or looping it, you must push the thread into the needle’s eye from the same direction as you did for the previous one.

You need to make sure that the thread must be thin enough to pass through the material you are doing the embroidery work on.

If this particular method doesn’t work, you can go for the method mentioned above, the double duty technique.

3. Knotting It

Knotting your thread to the needle embroidery will be the best idea if you utilise a slippery thread, such as silk or a thin thread. But to do the knotting work correctly, follow the steps given below.

Step 1

Thread your needle embroidery halfway down and place a knot. You must come to the point when you encounter a tiny circle within the needle’s eye.

The eye of the needle must have two strands of thread on it. DON’T pull the thread right at the needle’s end like you did when threading it. Stop there.

Step 2

With the circle you made still there, try to make the loop a bit bigger and then pass the needle’s point right through it. Make sure to do this gently.

You need to make sure that the circle or loop stays intact when both ends of the thread pass through the needle.

Try to grab onto the circle with your non-dominant hand so that you can easily direct the needle right through it.

Step 3

You have to pull the circle downwards towards the needle’s eye and create a tiny knot right above the needle’s eye. Make sure you make the knot right on the thread itself.

This technique will provide ideally if the thread matches well with the project material and the needle. Remember, that small knot you just made will help you immensely.

Steps To Thread The Needle

Now that you are already aware of how you keep the thread on the needle embroidery, you also have to know how to thread the needle.

You can thread your needle in two ways, and for both of these techniques, you will require an embroidery needle and thread. So, let’s take a look at these methods.

Method 1

Step 1

Cut down a piece of thread. Use around 18 inches for the single-stranded and a bit more for the double-stranded. Both the ends of the thread should carry a fresh cut as it will help you immensely.

Step 2

After that, take the thread and coil it on the needle. Your non-dominant hand will hold onto both ends of the thread.

It will be close to the area where the thread has wrapped the needle.

Step 3

You must pinch the thread close enough to where it wraps around the needle. This enables the needle to barely make any movement.

Keep in mind that you make a circle with the same circumference as that of the needle.

Step 4

While you are still pinching the needle, try to pull down the needle right out of the circle. After that, put that small circle or loop through the needle’s eye. It will go in pretty easily.

Even if it doesn’t go on the first try, you must try again. Now, you need to pull one point within, and you will have a threaded needle.

Method 2

Step 1

Cut a piece of thread. Keep 24 inches to 26 inches for the double-strand and 18 inches for the single. Be sure to cut both ends of the thread. Cutting at both ends will help you a lot.

Step 2

With your non-dominant hand, hold onto the needle and place the thread in your dominant hand. After that, try licking the last inch of the thread. Yes, you heard it right. You have to lick.

The moisture will enable the thread to stick properly onto each other. It will allow them to pass through the needle’s eye together with no hassle.

Step 3

Now, move the moisture-coated thread right into the needle’s eye slowly. Make sure to move the thread right through the needle without bending or losing the piles.

But if the thread does bend, add some moisture from your mouth, straighten it up and pass the thread through the needle’s eye. Keep trying, and it will surely get through.

If you cannot see correctly, you can use light or a magnifying glass to get the job done.

Threading And Keeping The Thread On The Needle: Things To Remember

When you have threaded the needle and wish to keep the thread on the needle itself, there are several things you need to know. Look below!

1. You need to make sure that the needle and thread you will use for your embroidery work are well paired. Projects that stand out to be delicate will need delicate thread and will require a thinner needle.

Thinner needles will come with tiny holes, known as the needle’s eye. The same goes for thicker materials, thick needles with big eyes and thicker threads.

2. You will come across numerous types of needles. Some of them have small eyes, and others have large eyes. On the other hand, several needles have sharp and dull points, and the other needles have different shape points.

It’s pretty crucial to go for an embroidery needle that will match perfectly with your stitching work. Also, you must go for a needle that can keep the thread intact on itself with no hassle.

3. You can easily use the threads as double-stranded for strength and single-stranded within the stitching work.

But it depends on you the type of thread you want to use for your project. Sewers are known to follow several conventions.

Among all these conventions, the most common type is the sewing buttons, in which you have to use a double-stranded thread.

Why The Thread Keeps Unthreading From The Needle

Some reasons prove why the thread on your needle embroidery keeps unthreading itself. Look at the information listed below!

  • Using the wrong spool of thread will make the thread jump out of the needle constantly.
  • Not tying a knot might cause the thread to unthread from the needle.
  • Some threads come with bumps, knots or irregularities, which might cause it to unthread itself from the needle.

Can I Keep The Thread On The Needle When Using A Sewing Machine?

Yes, you can. There are two ways through which you can keep the thread on the sewing machine. Firstly, you have to make sure that you have 3 inches to 4 inches of thread running out of the sewing machine.

Lastly, you need to change the needles. On certain occasions, these needles are pretty sharp within their eye and cause the thread to cut.

This will cause you to lose the thread out that eye. That is why you end up losing the thread instead of keeping it on the needle.

What To Do If I Cannot Thread My Needle?

When you are experiencing issues in threading the needle, you can use a needle threader. You will find a needle threader available in all the sewing kits.

They are those silver metal and flimsy things that come with a small metal loop or circle.

Jessica

Hello, I am Jessica Flores, and you are welcome to my website. I am a professional fashion designer and a seamstress. I always carried a passion for craftwork. My love for craft grew along with time. I have spent years researching and practicing in this field to gather colossal experience.

Leave a Reply

Your email address will not be published. Required fields are marked *

SewingMachineBuffs.com is participating in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
The Amazon Services LLC Associates Program is the leading selling program on the Internet, with hundreds of thousands of members.