Aida is a popular material, which is used in cross stitch and embroidery projects. Just like Linen, it’s a woven fabric, and it will start shredding at the edges while you keep working on it.
For such reasons, you need to prepare the material’s edges right before you begin your stitching or sewing work. Doing so will prevent the edges from fraying, and you easily finish the project quickly.
There are several ways through which you can finish the edges of the Aid material. These methods are pretty effective, and they will not take some time. You can gain more information about these methods with the help of this article.
How To Finish Edges Of Aida Cloth?
- How To Finish Edges Of Aida Cloth?
- How To Do A Clean Finish Edge?
- Can I Use The Overcasting Method To Finish Edges?
- Is It Possible To Fringe The Borders?
To complete the edges of the Aida fabric, you need to tape the edges. You can also go for the machine stitch technique for the edges of the Aida cloth before you begin your project. On certain occasions, you can also use the fray check or fray block technique to treat the edges of your material.
You can also roll up the edges of the fabric and secure with a clip or fringe the borders of the material. If you are interested to know about these techniques in detail, you can check the information provided below.
Treating the edges of the Aida cloth is not a difficult task. You need to use the method and carry the right materials and tools for the job. If it’s your first time finishing a fabric’s edges, the methods provided below will surely help you.
Method 1: Hemming
Using the hemming technique is one of the best ways to keep your material intact and neat.
Step 1: To begin the work, you must fold the fabric by ¾ inches or 2 meters on all the sides and with a warm iron press on it gently.
Step 2: After that, use a strong and brightly colored thread and sew around the material’s edges with the running stitch technique. You must complete the thread securely on the ends.
Method 2: Taping The Fabric’s Edges
Using tape to secure the edges of your Aida cloth is a fast and straightforward way to prevent it from fraying. You can use low-tack tape or masking tape over your fabric’s edges. Even though the method is quick and clear, it can leave behind a residue that will attract dirt.
Step 1: If you plan to utilize this technique, you must cut off the taped area instead of peeling it once you have completed your sewing work.
Step 2: Make sure you make an allowance when measuring the material.
Method 3: Use Pinked Ends
Take the help of pink shears to create a zigzag pattern cut on the material’s edges. It will stop your fabric from tattering instantly.
Step 1: Please make sure to measure the pattern of the cloth right before you pre-mark or cut sharp angles on both surfaces. Fraying might take place, but using these types of shears will indeed reduce it.
Step 2: After measuring the pattern, you can now cut sharp angles on both the surfaces.
Method 4: Using A Hoop To Hold The Material In Place
When you are working on a small project, it will be much better to use a hoop. The hoop will keep the material’s edges in excellent condition and allow you to make even stitches.
Apart from that, using a hoop will also help you remove the pressure from the material’s edges and prevent you from touching them while you work.
Method 5: Finishing The Edges With A Serger
Serging the ends of your Aida fabric stands out as the best way to prepare them so that they do not fray. If you have a server beside you, this is undoubtedly the right time to make use of it. But when you do not have one, you can go for the regular sewing machine.
Step 1: When you are interested in doing an overlock stitch, use an overlock foot on the stitching device.
Step 2: Otherwise, you can set up your machine for a zigzag stitch and stitch along the edges closely and carefully.
Method 6: Hand Stitching
The hand-stitching technique is an easy method and is ideal for small fabric pieces. You can also use this technique if you do not have a serger or a stitching device.
Step 1: With a simple whip stitch, you can overcast the edges of the material. You can also fold up the edges and transform them into a hem and then baste it.
Step 2: It will be much better to use the regular sewing thread when you are hand stitching the edges. Try to sew ¼ inch to ½ inch right into the material, as it will prevent you from pulling up the edges.
Method 7: Fray Check Or Fray Block
Fray blocking or checking the edges of your material stands out as the most straightforward technique of all time. They come in the form of a squirt bottle, and you apply the solution easily on the Aida cloth’s edges. You have to follow the instructions provided by the manufacturer.
Even though fray block is ideal for material, it’s a chemical and might deteriorate over time. Just to be safe, trim off the sealed edges after you have completed your sewing work on the fabric.
Method 8: Use Bias Links
The majority of the people will like to join their stitches with the help of bias joining. It helps in encompassing all the bare sides of the fabric completely.
Step 1: You can pre-purchase single or double-folded bias binding tapes in the form of 3-yard bundles. Otherwise, you are free to make one by yourself.
Step 2: Once you complete the embroidery work, you can use a seam puller to separate the linkage. You can also hold it in place for a final inspection.
Method 9: Roll Up The Edges With Clips
When there’s a lot of excess material, you can simply roll them up and secure them with plastic clips.
Step 1: You can use the Wonder Clips for the job, and it stands out as one of the best ways to manage your material. This technique will be a good choice for individuals who are working a large Aida fabric.
Step 2: Make sure to roll the material in such a way so that it doesn’t get caught on the clips when you are working on the fabric.
How To Do A Clean Finish Edge?
Finishing the edges can keep the insides of your project or garment appear neat and clean and will give the outside area a professional look.
Another reason is that when you prepare the edges of your fabric, it will prevent you from making a mess during your stitching work. You don’t have to work about the threads sticking out and spend half of your time cutting or trimming them up.
The finishing work will not take too much time, and you can get the job done in advance. This way, you can begin your stitching project immediately and get it done within a given timeframe.
When it comes to doing a clean finish edge, the process is not that tough. It’s ideal for woven fabrics like Aida, and all you have to do is place the right sides together and press on it with an iron.
Make sure each side of the seam allowance is around ¼ inch or less than that. You have to sew it close to the edge and not to the garment. It will not take you much time, and you’re free to use color thread or go for the one that matches the fabric’s color.
Can I Use The Overcasting Method To Finish Edges?
Yes, you can. You can begin the work by picking up the usual zigzag stitching technique on your sewing machine. Change it a little so that it’s marginally broader than the standard-setting. No matter what type of tool you are using, make sure it protects the zigzag stitch of the material.
Through this particular method, you can enclose the threads located around all the areas of the cloth to prevent fraying from taking place. Along with that, you can conduct the overcasting technique with the help of a serger. Otherwise, a regular sewing machine can also be a great choice.
Is It Possible To Fringe The Borders?
Yes, you can do so. Fringing the edges of your Aida fabric stands out as a good idea. You have to include the hem-stitching technique and a colored yarn for this particular method. This will help create the fringe margins, which you can easily use on a woven material like Aida.
It will stop the material from shredding, but it also makes it appear stylish and beautiful at the same time. You can also keep this finished if you want to.
On the other hand, it will be much better to use a good strategy to cover the part of the fabric while you are working on it and to incorporate it only at the edges of the material.